Table of Contents
TL;DR
- Your email marketing cost depends on three choices you control: the pricing model (contacts, subscribers, or sends), your monthly send volume, and the work you buy outside the software.
- Migration, strategy, copywriting, design, integration, and ongoing management sit outside the subscription and need separate line items.
You can estimate your email marketing cost from your own list size and send frequency before you pick a platform. Three decisions drive the result: which pricing model you accept, how many sends you produce each month, and how much non-software work you need.
Sequenzy
Table of contents
Three pricing models change your email marketing cost in different ways
Platforms bill your growing audience through different meters. None of them is cheaper in every situation, because the winner depends on how large your list is and how often you write to it.
Contact-priced plans charge for the list you store
Mailchimp defines a contact limit as the maximum number of contacts you can store in your account at any point during your billing cycle. You set that limit when you choose a plan. A larger stored list moves you to a higher price, whether or not you email everyone.
Subscriber-priced plans charge for the audience you reach
Kit prices its paid Creator plan by email subscriber count. Its pricing page shows the Creator plan for 1,000 email subscribers, so your bill follows the size of your audience.
Send-priced plans charge for the emails you deliver
Sequenzy charges by email volume and includes unlimited stored contacts on all plans. Brevo’s Starter plan mixes both meters: each tier sets a monthly email send allowance and a contacts-stored allowance together.
Official entry prices show where each platform’s model starts

All figures below were checked on 2026-11-03. They are entry points, and each applies only to the scenario it matches. This list does not rank the platforms.
Mailchimp links contact limits to send limits
On monthly plans, the send limit is a multiple of your contact limit: Essentials 10×, Standard 12×, Premium 15×. Using the 4,000-send scenario in the calculation section below with 1,000 contacts: Essentials allows 1,000 × 10 = 10,000 sends and Standard allows 1,000 × 12 = 12,000 sends. Both cover 4,000. If you exceed a limit, Mailchimp does not interrupt service and adds a charge to your monthly bill. One Standard add-on block of 1,000 contacts includes 12,000 additional sends. Select your contact tier on Mailchimp’s pricing page to obtain the applicable subscription price.
Kit prices the Creator plan by subscriber count
Kit Creator costs $33/mo, which is $390 billed yearly, for 1,000 email subscribers. This matches the 1,000-contact scenario only.
Brevo ties monthly sends to stored contacts
Brevo Starter starts from $9/month for the first tier. The tier sets sends and stored contacts together:
| Monthly email sends | Contacts stored |
|---|---|
| 5,000 | Up to 500 |
| 10,000 | Up to 1,500 |
| 15,000 | Up to 2,500 |
| 20,000 to 100,000 | Up to 500,000 |
Your 1,000-contact scenario needs 4,000 sends, which fits the 5,000-send tier on sends, but that tier stores up to 500 contacts. The 10,000-send tier stores up to 1,500, so 1,000 contacts need that tier. The $9 figure applies to the first tier only. Brevo’s prices exclude taxes.
Sequenzy charges by email volume with unlimited contacts
| Plan | Price | Emails per month | Contacts |
|---|---|---|---|
| Free | $0 | 2,500 | Unlimited |
| Pro, 15,000 emails | $19/mo | 15,000 | Unlimited |
| Pro, 30,000 emails | $29/mo | 30,000 | Unlimited |
The 4,000-send scenario fits the $19 monthly tier. The 20,000-send scenario fits the $29 monthly tier with 30,000 emails. Both include unlimited contacts. Sequenzy lists these monthly prices.
Your email marketing cost also includes work the subscription does not cover
Platform fees recur each billing period. Other work follows your workload and your provider arrangements, and this article states no rates for it.
Migration and setup are one-time work
Moving a list and configuring an account happens once. Budget it as a separate one-time line rather than spreading it into the monthly subscription.
Strategy, copywriting, and design are separate scopes
Planning your email program, writing messages, and designing templates are distinct jobs. A platform subscription does not include them by default, so price each one on its own.
Integrations connect forms, sites, memberships, and product systems
Connecting signup forms, your website, a membership, a digital-product system, or an ecommerce tool is technical work. Quote it separately from the software.
Ongoing management depends on workload and provider
Running campaigns and maintaining lists continues every month if you hire it out. The cost depends on how much you send and on the arrangement you agree with the provider.
Pricing limits can change your budget after you buy

Treat every displayed price as a dated planning input, not a final invoice.
Taxes and add-ons sit outside the headline price
Brevo states that its displayed prices exclude taxes, and its final price depends on the tier and any add-ons you attach. Mailchimp bills extra when you exceed a contact or send limit. This article excludes taxes and add-ons from every figure.
Billing cadence and tier changes alter the monthly figure
Kit’s $33/mo figure comes with $390 billed yearly, so you pay the annual amount at once. Moving to a larger tier changes the price, so verify the tier that fits your list before you purchase.
Monthly send volume decides which plan limits you reach
Monthly send volume equals the recipients of your campaigns, plus the recipients of automation and transactional messages that the plan counts. Compare that total with each plan’s allowance.
A send counts every recipient, not every campaign
Mailchimp counts each email sent to an individual contact as 1 send. One email to 500 contacts equals 500 sends. A single weekly newsletter therefore consumes your allowance in proportion to your list.
Test and transactional messages can consume your allowance
Mailchimp states that test and transactional emails count toward the monthly sending limit. Check each other vendor’s documentation before you assume it counts messages the same way.
Price the same send scenario on every platform
Add campaigns, automations, and transactional messages before comparing the monthly total.
Three scenarios show how email marketing cost scales with your list
Assumptions for every scenario: 4 weeks per month, one campaign per week, and every contact receives every campaign. These are labeled planning assumptions, not vendor rules.
What does one weekly campaign cost for 1,000 contacts?
1,000 recipients × 4 campaigns = 4,000 sends per month.
What does one weekly campaign cost for 5,000 contacts?
5,000 recipients × 4 campaigns = 20,000 sends per month.
How does a mixed campaign and product-email workload add up?
Assumptions (all illustrative, labeled by you in your own sheet): 2,000 contacts, one weekly campaign, plus 300 product or transactional emails per month.
- Recurring campaigns: 2,000 × 4 = 8,000 sends.
- Product or transactional emails: 300 sends.
- Total: 8,000 + 300 = 8,300 sends per month.
Mailchimp counts transactional emails toward its limit, so all 8,300 count there. Confirm how any other vendor treats the 300 before you rely on the total.
A calculation worksheet turns these inputs into your own monthly range
This section holds the method and its limits.
The four inputs combine into one monthly formula
Monthly sends = (list size × campaigns per month) + additional counted messages.
Monthly cost = the plan or service cost for that list size and send total, taken from the vendor’s pricing page.
The four inputs are list size, campaign frequency, additional counted messages, and applicable plan or service costs. Example: (1,000 × 4) + 0 = 4,000 sends. Example with product emails: (2,000 × 4) + 300 = 8,300 sends.
The stated assumptions define what the result means
- Recipients: every contact is active and receives every campaign.
- Weeks per month: 4. A calendar month can contain more weeks, so adjust if you send on a fifth week.
- Automation and transactional messages: add them only if the vendor counts them. Mailchimp counts test and transactional emails. Other vendors need checking.
- Excluded: taxes, add-ons, migration, strategy, copywriting, design, integration, and management.
The scenarios are planning examples, not observed customer bills. Add your actual service quotes, taxes, and any optional charges before committing to a budget.
Every vendor price carries the date 2026-11-03
- Kit Creator: $33/mo, $390 billed yearly, 1,000 subscribers (checked 2026-11-03, Kit pricing).
- Brevo Starter: from $9/month, first tier, excluding taxes (checked 2026-11-03, Brevo Help Center).
- Sequenzy: Free $0 for 2,500 emails; Pro $19/mo for 15,000 emails and $29/mo for 30,000 emails (checked 2026-11-03).
- Mailchimp: send limit of 10×, 12×, or 15× the contact limit by plan (checked 2026-11-03, Mailchimp help).
After you calculate monthly sends, compare the resulting tier with the workflows in the Sequenzy review and Kit alternatives.
Budget decision
Choose the meter that follows your real growth pattern
- Contact growth and send growth can create different bills.
- Add setup and migration work after the software comparison.
What should you take away?
Copy the four-input formula into a spreadsheet, fill it with your own list size and send frequency, and add separate rows for one-time and service work. Then confirm the applicable tier on each vendor’s pricing page before you commit.
This post may contain affiliate links. If you click them, I might earn a small commission (it costs you nothing and helps me keep shipping quality articles every day for your reading pleasure).